ADJ Encore Burst 200

It’s powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array. The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.

Source
- Light Source: 2x WW CREE COB-LEDs
- Individual LED wattage : 110W
- Average LED lifetime : approximately 50,000 hrs.
- Color temperature : 2700K (1200K Tungsten Mode)

Optics
- Beam Angle: 50 degrees
- Manual adjustment of lens position -15 to +15 degrees

Control
- 3 operational Modes : Manual Dimmer Mode, Tungsten Mode and DMX Control
- 6 DMX Modes: 1, 2, 2A, 3, 4 & 6-channel
- Individual Pixel Control
- RDM compatible
- 16bit Electronic Dimming: 0 - 100%
- 6 selectable Dim Curves (Standard, Stage, TV, Architectural, Theatre & Stage 2)
- Adjustable LED refresh Rate : 900Hz - 25kHz
- Adjustable Gamma Brightness : 1.0/2.0/2.2/2.4/2.8
- LED pulse and strobe effect
- 4-button, DMX digital display on rear panel

Colors
- Warm White 2700K (1200K Tungsten Mode)

Construction
- Metal Housing
- IP Rating: IPX4
- Can be assembled in vertical or horizontal fixture clusters
- Yoke and omega bracket included

Electrical
- Multivoltage 100-240V 50/60Hz
- Power Consumption: 235W

Connections
- 5-pin IP65 Locking DMX In/Out connections
- IP65 Locking Power In/Out connections

Dimensions & Weight
- Dimensions (LxWxH):
- Fixture only : 400 x 200.5 x 215.5mm
- With bracket : 400 x 200.5 x 264mm
- With Yoke : 503 x 200.5 x 325.3mm
- Weight: 6,8 kg